PRODUCT CENTER
SDL protein chromatography system
SDL protein chromatography system
1. SDL is a fixed module configuration.
2. The SDL is an integrated design with a moderate size, saving space and suitable for putting into a freezer.
3. Each module is oriented to the user, making it easier to understand the relationship between the modules.
4. The compact design is more suitable for laboratory protein purification.
5. The powerful SCG chromatography workstation provides intuitive and flexible method editing, system control and data analysis.
6. It can be adapted to columns imported from GE, Biorad or domestic brands.
model |
SDL-30 |
SDL-100 |
System pump |
Plunger pump, bio-inert PEEK material, can provide continuous, stable and accurate flow rate |
|
Velocity range |
0.01 ~ 30 mL / min |
0.01-100mL / min |
Maximum pressure |
100bar (10MPa or 1500psi) |
70bar (7Mpa or 1000psi) |
mixer |
Dynamic mixer, standard configuration 2mL * |
|
Flow accuracy |
± 2% |
|
Gradient type |
Isocratic, linear gradient, step gradient, the gradient ratio can be modified online |
|
UV detector |
Fixed dual wavelength (260nm and 280nm); 200-400nm continuously variable dual wavelength, |
|
Conductivity detector |
0.001-999.99ms / cm, accuracy ± 2% |
|
Temperature Sensor |
0-100 ℃, accuracy ± 1 ℃, temperature compensation for conductivity and pH |
|
pH detector |
0-14, accuracy ± 0.1 |
|
Four-channel mobile phase selection |
The A / B pump provides two Buffer inlets, A1 / A2, B1 / B2 |
|
Collection valve |
Double-channel large-volume collection valve (1 waste liquid, 1 collection outlet) *** |
|
Automatic injection valve |
Automatic sample injection, software control, automatic switch between Load, Inject, and Waste modes |
|
Solvent tray |
The top has its own solvent tray structure, which is more convenient to place and save space |
|
Chromatography workstation |
SCG chromatography workstation (including workstation software, Dell computer, genuine Win7 operating system) |
|
Installation kit |
PEEK / PTFE pipe, installation manual, user manual, pipe joint, common tools, etc. |
|
Bubble sensor (optional) |
Used to detect air bubbles in the pipeline, so as to enter the next operation or stop. |
|
Column B valve (optional) |
Support Column and ByPass functions |
|
Three-post position selection module (optional) |
Support to install 3 pillars at the same time, can be switched freely through software, and contains Bypass |
|
Component collector (optional) |
FC-S2, small size, flexible and diverse collection methods, can be placed side by side with the same or different specifications of the collection bracket, automatically identify the size of the collection rack tube. |
|
Materials in contact with liquid |
Peek or stainless steel, PPS, PVDF, PTFE |
|
power supply |
220VAC/110VAC |
|
Dimensions (width * height * depth) |
430mm*500mm*460mm |
* Mixer optional: 0.5mL, 1.4mL. *** The component collector can be connected.
LISTEN TO THE VOICE OF EVERY CUSTOMER
底部版权
Job | Contact Us | Smart map | Message
Page Copyright:sepure Instruments Inc . Copyright ©2020 All Rights Reserved. www.300.cn 苏ICP备16061917号